成人直播

Core Units

• Academic Study Skills for Engineering and Technology:听You will gain the fundamental academic and research skills required for degree level study. The unit will introduce you to a broad grounding in literature searching, literature review, data collection, methodological approach, data analysis and interpretation and ethical practice. It will also support you to begin to develop a critical and analytical approach to your work and identify areas for personal development.听
• Introduction to Computers:听This unit will enable you to develop a basic knowledge and understanding of computer technology and its role in the modern world. It will also cover a range of practical computing skills and techniques you will need to be prepared for studying at degree level.
• Mathematics for Engineering and Technology:听Mathematics develops analytical and problem-solving skills and provides the knowledge to solve engineering and coding problems. This unit will provide you with confidence in mathematics and enable you to perform calculations on a range of scientific data from engineering, creative technologies and computing disciplines.听
• Introduction to Engineering Science:听Engineering science is a broad discipline that encompasses many different scientific principles and associated mathematics that underpins engineering. This unit will enable you to develop a basic understanding of a range of fundamental scientific principles to solve elementary engineering problems.
• Introduction to Computer-Aided Design Tools:听This unit has been designed to enable you to use CAD tools to create basic 3D solid models and assemblies and to produce orthographic drawings. Computer Aided Design (CAD) tools are used in engineering to communicate ideas and share design intent and are therefore a fundamental skill for engineers.听听
• Foundation Year Engineering and Technology Project:听You will design, carry out and report on an engineering or technological investigation, based on an agreed topic chosen by the unit leader. You will carry out a research task for further investigation. With a focus on global context and sustainability, the student will also produce a literature review.

Core units:

• Engineering Design with Practice:This unit aims to provide you with an understanding of and ability to apply the key engineering tools, methodologies and strategies necessary to design, analyse, validate and communicate an engineering solution.听听
• Engineering Principles A:听You will develop the ability to apply a range of principles to the design of components, structures and machines and operation of mechanical systems.
• Engineering Mathematics:听This unit will enable you to extract and evaluate pertinent data and apply this to engineering analysis techniques in the solution of unfamiliar problems. You will gain a firm grounding in mathematical and statistical methods necessary within the engineering field.
• Materials with Practice:听This unit will provide you with the ability to identify, plan and apply skills that are necessary for the selection and specification of suitable materials and production techniques for design.
• Mechatronics & Robotics Principles: This unit focuses on developing a working knowledge of the methodologies used in designing mechatronic and robotic systems and enhancing the ability to apply these principles to real-world design and engineering problems. The unit covers a wide range of topics, including the principles of robotic mechatronics, kinematics, statics, dynamics, programming, and an introduction to Artificial Intelligence. The unit prepares students to understand and apply an integrated approach to solving and implementing mechatronic and robotic systems, and to investigate mechatronic and robotic problems using practical laboratory skills.
• Electrical and Electronic Principles:听You will be introduced to and develop an understanding of the principles required to design electrical and electronic systems within an engineering project.

Core units:

• Stress and Dynamics:听You will develop a further working knowledge, understanding and application of an increased range of mechanical engineering principles relevant to the design of components, structures and machines.
• Engineering Design Tools:听This unit aims to develop further understanding of the principles of engineering design visualisation, verification and presentation through an integrated workflow incorporating engineering analysis, 3D parametric modelling, manufacturing processes and metrology validation.听
• Engineering Simulation:听In this unit you will take part in engineering design practices and learn about new technologies for mechanical and electronic concepts. You'll become familiar with industry standard simulation technologies
• Engineering Mathematics for Mechanical Systems Design:听You will use mathematical and statistical methods to generate engineering solutions that meet all aspects of the problem including production, operation and maintenance. Additional experience will surround gaining proficiency in the modelling, analysis and design of mechanical systems.
• Robotic Digital Control: This unit aims to introduce students to the analysis, design, and implementation of robotic control systems. It focuses on developing an understanding of new technologies and industry-standard simulation tools for robotic digital control. The unit also aims to enhance professional competence in using modern analytical techniques for developing robotic control engineering solutions and understanding machine-vision methodologies. The unit covers topics such as control systems, kinematics, signal processing, machine learning, and machine vision.
• Management and Commercialisation: This unit will introduce you to key aspects of business and management that relate to the development and delivery of commercial value. You听will gain an initial understanding of how businesses strategically reflect, identify opportunities and threats, clarify where value lies for both customers, align key business functions to generate competitive advantage and leverage their resources to deliver their value propositions.听听

You will complete a minimum 30-week industrial work placement which can be carried out anywhere in the world. You'll get an opportunity to include a period of academic study during this time. The placement year offers a chance to gain experience and make contacts for the future.

• Mechatronics: This unit aims to integrate various engineering disciplines to provide flexible and intelligent solutions to engineering system problems. It emphasises the application of mechanics, electronics, simulation, and design. The unit aims to equip students with the latest technologies for understanding, applying, and integrating mechanical and electronic concepts. It also focuses on developing professional competence in using modern analytical and simulation techniques and tools for the mechatronic development process.听
• Innovation and Professional Practice: The Innovation and Professional Practice unit aims to equip students with skills, knowledge, and understanding of the global organisational environment. It emphasises the importance of organisational development, leadership, human resource management, equality, diversity, and inclusion (EDI). It also focuses on identifying and mitigating risks, including security and cyber-security risks, and understanding intellectual property rights, standards, and quality management systems. Students are expected to demonstrate knowledge of organisational development, collaborate within an innovation framework, understand ethical principles and international standards, apply principles of project management, risk management, quality management systems, and function effectively as a team member or leader.
• Computational Engineering: You will develop the ability to apply analytical methods efficiently and effectively in the analysis and design of complex components and structures, and predict their performance in service using both analytical and computer tools.
• Advanced Robotics: This unit aims to provide students with an in-depth understanding of robotic systems, focusing on the application of new technologies, industry-standard tools, modern analytical techniques, and the integration of artificial intelligence and machine vision systems. Students are expected to develop a comprehensive understanding of robotic system design, computational and analytical techniques for robotic system modelling, and the ability to analyse complex robotic problems to select an appropriate robotic architecture. It also emphasizes the management of ethical, risk, and security issues associated with robotic systems.
• Engineering Project: You will develop an individual project which assesses your creative problem-solving skills in engineering design, combined with your mathematical modelling and analytical engineering skills.

• Interdisciplinary Group Project: The Interdisciplinary Group Project unit aims to develop students鈥� understanding of different roles within a team and their ability to exercise initiative and personal responsibility. It focuses on developing management skills, understanding personality characteristics, analysing how these characteristics affect group dynamics, and applying strategies for team building and conflict resolution. The module expects students to adopt an inclusive approach to engineering practice, apply management techniques, function effectively as an individual or a team member, and critically reflect on interpersonal skills required in a team environment.听
• Life Cycle Management: The Life Cycle Management unit aims to deepen students鈥� understanding of sustainable design issues through life cycle techniques. It focuses on identifying and quantifying environmental impacts during a product/service鈥檚 life cycle using Life Cycle Analysis (LCA). Students are expected to demonstrate a comprehensive understanding of sustainable design concepts, apply computational and analytical techniques for impact analysis, understand how manufacturing techniques and materials affect a product鈥檚 environmental impact, and apply knowledge of product/service lifecycle scenarios to a project.
• Model Based Engineering: The Model Based Engineering unit aims to equip students with a practical understanding of Model Based Engineering through an integrated digital workflow. This includes engineering analysis, 3D parametric modelling, tolerance analysis, and metrology validation. Students will learn to use engineering analysis tools and 3D modelling techniques to optimise solutions to engineering design problems. The unit emphasises the application of these techniques through digital product definition methodologies and the use of CMM metrology within a digital workflow.听
• Robotic Control Design:听Learn how to听critically evaluate a real time mechatronic control system requirement, analyse the results and choose an appropriate real time control architecture and software paradigm for a particular robotic application.
• Advanced Structural Mechanics: This unit aims to provide students with a comprehensive understanding of structural mechanics theories and concepts, and the ability to apply these theories to solve unfamiliar engineering problems. It focuses on developing professional competence and critical awareness in selecting and applying appropriate methods for designing and analysing structural components.听
• Robotic Systems:听听During this听unit you will be听introduced to the analysis, design and implementation of robotic systems including kinematic, mechanisms, and their use for robot structures.听You will also be equipped with the skills听to undertake the challenging task of designing robotic systems that are deployed in a wide range of application.

Programme specifications provide definitive records of the university's taught degrees in line with Quality Assurance Agency requirements. Every taught course leading to a BU Award has a programme specification which describes its aims, structure, content and learning outcomes, plus the teaching, learning and assessment methods used.

Whilst every effort is made to ensure the accuracy of the programme specification, the information is liable to change to take advantage of exciting new approaches to teaching and learning as well as developments in industry.

If you have been unable to locate the programme specification for the course you are interested in, it will be available as soon as the latest version is ready. Alternatively please听contact us听for assistance.

With practical learning being integral to your degree, we provide industry standard specialist facilities.听
听
We continue to invest in our campuses so all our students can maximise their talents today and into the future.听
听
Visit our to find out more and get a feel for where you鈥檒l be studying while you鈥檙e based on our Talbot Campus.听

A placement should be a highly rewarding experience for you and the employing company and we do our best to ensure that everyone involved feels that they have got the most that they can from the experience.

Placements provide a great opportunity to make your first career steps and enhance your employability while you鈥檙e completing your studies. You鈥檒l get the opportunity to:

• Put the theory learnt throughout the course into professional practice
• Enhance your study and help you decide on subject options (where appropriate)
• Learn a wide range of skills such as time management, problem solving and team work (all of these are important to succeed in any career)
• Make contacts, as it is not uncommon for our students to be offered permanent positions to return to after graduating
• Gain a real insight into how the industry operates in roles that would be almost impossible to achieve for an outsider
• Many of our students, during their placement, are given responsibilities normally associated with graduate trainees.

You will begin your placement after completion of your second year of study and you must complete a minimum 30 weeks.

The faculty running your course will offer the support of a Placement Coordinator.听

They鈥檒l help you plan your placement so make sure you get the right experience for you. That includes offering help and support if you need to move to another part of the UK 鈥� and even another country 鈥� to get the most out of your time.

We鈥檝e also built close industry links over the years 鈥� so our network of employers that are keen to work with placement students is always growing. Or if you鈥檇 prefer to arrange your placement independently, we can offer advice on how to do that too.

• Jaguar Cars Ltd
• Xerox
• Aston Martin Lagonda Ltd
• Dyson Appliances Ltd
• The Gillette Company.听

AccessBU: AccessBU provides you with the opportunity to tell us about your circumstances that are not always evident in your UCAS application. This widening access initiative also considers relevant criteria such as being in care or if you live in an area with a low participation rate in Higher Education - if you are eligible, your offer could be up to 16 UCAS tariff points below the published tariff.

Apprenticeships: We recognise the transferable knowledge and skills gained through apprenticeships and welcome applications from students with a Level 3 Advanced Apprenticeship recognised by the Institute for Apprenticeships. Each application will be considered on a case-by-case basis.

Deferred entry: We are happy to consider eligible applicants for deferred entry. If you have already submitted your application, please submit your deferral request through our website.听

Direct entry: We welcome applications from students who have previously studied at degree level at other institutions and wish to transfer onto a BU course. Our Recognition of Prior Learning (RPL) procedure enables credit awarded from one institution to contribute to a BU award, subject to an application process. Please visit our RPL webpage for more information.

Mature applicants:听We recognise that mature applicants may have a wealth of experience rather than formal qualifications, so we鈥檒l consider your application on these merits if included in your application. You鈥檒l need to apply to BU in the usual way through UCAS and you may be invited to an interview to discuss your suitability for the course based on the experience you tell us about in your application.

We select candidates for this course by looking at your application; there are usually no interviews or selection activities needed. For that reason, make sure your application really stands out from the crowd, and leave us in no doubt as to why you should be joining BU. You can find some handy hints about filling in your UCAS form on our听how to apply听web pages.

We look at individual applications and make a tailored offer based on your potential to succeed on the course considering a range of factors, including your academic achievements, work and other experience, reference and personal statement, and in some cases, your performance at an interview or a portfolio review. Typically, we make an offer at the bottom of the tariff range.

AccessBU听gives you the chance to tell us more about you and your life experiences if you haven鈥檛 had the same educational opportunities as other applicants. If you are eligible for AccessBU, your offer could be up to 16 UCAS Tariff Points below the published tariff.

Our offer-making will typically be based on your most recent qualifications, including any required subjects where applicable. We'll consider all qualifications when assessing your application, although these may not be part of our offer.

If you do not meet the criteria of your original offer, we may still offer you a place. We will review your whole application and consider all academic qualifications (including those not in the offer) to see if you have the academic potential to succeed on the course. If we feel the answer is yes, we will confirm your place.

These courses have compulsory manufacturing elements, using machinery in workshops. Students must complete a health and safety risk assessment before using the workshops, for their safety and that of others. As part of that assessment students provide information about any conditions or disabilities that might affect their ability to undertake manufacturing fully or safely.

If you have such a condition or disability, please let us know as soon as possible. You can contact our听Additional Learning Support听(ALS) service about this before or after making an application. We will then work with you to identify any support or adjustments you would need. Our ALS team works with the Faculty to seek to put in place reasonable adjustments and health and safety plans.

Exceptionally, it may not be possible to arrange for a student to access these courses without either over-riding their core standards or competencies or creating unacceptable risks to health and safety. If that is the case we will help you explore alternative course choices.

Graduates from the Department of Design and Engineering are well-equipped for a wide range of听 roles in manufacturing and engineering, with alumni working at companies like Aish Technologies Limited, Canyons, General Electric Aviation, Modulift, Pall Aerospace, and Visteon.

Typical Starting job titles:

鈥� Mechatronics Engineer
鈥� Robotics Engineer
鈥� Control Systems Engineer
鈥� Automation Engineer
鈥� Design Engineer
鈥� Mechanical Engineer
鈥� Research and Development Engineer
鈥� Maintenance Engineer
鈥� Product Development Engineer
鈥� Quality Assurance Engineer
鈥� Application Engineer
鈥� Automation Engineer

听

Industries worked in:

鈥� Engineering
鈥� Automation
鈥� Robotics
鈥� Design
鈥� Automotive
鈥� Aerospace
鈥� Medical

Once you have completed an undergraduate Honours degree, you can further develop your education by studying for a postgraduate degree. Please visit our Postgraduate section for further details about our range of Master's degrees.

Accreditation by the Institution of Engineering Designers (IED) and the Institution of Mechanical Engineers (IMechE) to meet, in full, the exemplifying academic benchmark requirements for registration as a Chartered Engineer (CEng) will be sought in 2025.

What鈥檚 included in your tuition fee?

Your tuition fee covers expenses associated with your course, including tuition materials, access to facilities, mandatory field trips and the following:

• Materials for laboratory and mandatory听field-based teaching activity.
• Support for finding placements (UK or abroad) and fieldwork, and non-financial support whilst on placement if this is part of your course of study.
• A range of student services 鈥� advisors, help desks, counsellors, placement support and careers service.
• The Library 鈥� access to a wide range of electronic resources (databases, e-journals and e-books), print and multimedia collections, subject librarians and study spaces.
• Access to Brightspace, our virtual learning environment, which offers a responsive and personalised learning experience with powerful learning analytics capabilities, integrated social media and advanced video features.
• IT labs (some open 24/7), wireless network, AV equipment to borrow.
• Free software download to your personal device of Microsoft Office 365 ProPlus while you are studying, as well as access to applications provided on AppsAnywhere, subject to licensing and compatibility restrictions.
• Peer Assisted Learning (PAL) scheme.
• Disability and additional learning support, according to individual circumstances.
• The BU Language Centre to help you develop/improve foreign or English language skills.
• 24 hours a day, 365 days a year security team.
• A2-A0 Plots for CAD coursework.
• Loan of lab coats and听safety glasses.

Additional costs

We are committed to offering you value for money and ensuring there are no hidden costs while you are studying with us, therefore we have listed below any additional costs you may incur that are not covered by your tuition fee:

For September 2025听entry:

• Laptops, tablets and mobile devices and any software used on personal devices. Access to a personal computer is strongly recommended for your study. If you are experiencing financial difficulty, visit our website for information regarding hardship funds.
• Textbooks, general stationery and other supplies. Our award-winning library is stocked with a large range of textbooks and online resources, free of charge. The Students鈥� Union shop听stocks听a wide range of stationery supplies.
• Accommodation and living costs. Please visit our website for more information.
• Travel costs for optional field trips, outdoor wear and footwear for mandatory and optional field trips (if applicable).
• Travel costs to and from the University campus. An annual bus pass can be purchased alongside听your rent if you are living in halls of residence/Unilet accommodation or may be purchased separately.
• Travel costs to and from your placement (both in the UK and overseas) if this is part of your course of study. Information about funding your placement year can be found on our website.
• You will need to meet the cost of any Enhanced Disclosure and Barring Service (DBS) check if required by your placement setting, including any Post Office verification charges.
• Clothing or equipment costs required for your placement if this is part of your course of study.
• SportBU membership.

While all aspects of the programme, including required field trips, are included in the fee, additional, optional or extra curricula activities may be available for which a student contribution is required.

If you need to repeat one or more units during your studies (with or without attendance)听the pricing will be pro-rata听of the full-time fee.

Roya Haratian is Senior Fellow of Higher Education Academy, Charted Engineer (CEng) with UK Engineering Council and Principal Academic in Electronic Science and Engineering at Department of Design and Engineering, Faculty of Science and Technology, 成人直播 - UK. She is leader of Athena SWAN, which is AdvanvceHE Gender Equality Charter, and Inclusivity Process within the department which has led to successful Athena SWAN Bronze Award in 2021.

She is covering multidisciplinary topics such as Mechatronics and Control System Design for final year undergraduate and master programs and interested in research area mainly under umbrella of these topics with application in different industries whereas she is leading the Mechatronics/Electronics route of department's curriculum from L4, L5, L6 and L7.

The world of robots fascinates me so robotics is my prime area of research. Even though I am keen on every aspects of robotics, my current research interests are mainly focused on dexterous robot hand and tactile sensors for specialised applications. This together with intelligent interfaces can be used for variety of end-user applications. This is intended to relieve operators from monotonous and potentially hazardous working environments for safety and security. A showcase to this is the development of a multi-fingered robotic hand for Atomic Weapons Establishment of Ministry of Defence.

Dr. Mihai Dupac obtained a Ph.D. in Mathematics from the West University of Timisoara, Romania, and a Ph.D. in Mechanical Engineering, at Auburn University (), AL, in the United States.

Six PhD students graduated under his supervision based on the research funding and collaborations with AECC (Anglo European College of Chiropractic), Bournemouth Hospital, and Hydreco Hydraulics. He was acting as an examiner/chair for more than 10 PhD/MPhil examinations and transfers. He is the author of more than 100 publications and 4 books in the field of engineering namely Statics with Matlab, Springer, 2013, Advanced Dynamics: Analytical and Numerical Calculations with Matlab, Springer, 2012, Machine Component Analysis with Matlab, Elsevier, Butterworth-Heinemann, 2019, and Engineering Applications: Analytical and Numerical Calculation with MATLAB, Wiley, 2021.

He is a Fellow of the Institute of Mathematics and its Applications (IMA - UK), a reviewer for Mathematical Reviews (MatSciNet, US), a member of the American Society of Mechanical Engineers (ASME - USA), and an Honorary Researcher at the University of Craiova (Faculty of Mechanics), Romania (2020-2021). He was involved in the delivery of external courses for aircraft industry employees and acted as a program review panel member (external) of the BEng (Hons) Engineering Top-up (2019) accreditation.

Mehran has many years experience as a designer and has interests in design methods, manufacturing, material selection and applied technology. He is an active member of the Design Simulation Research Centre. He has been involved with PhD research supervision for many years. During his time as an academic at 成人直播 he has run a number of units in the areas of Applied Technology, Technological Principles, Science & Technology, Materials & Processing, design methods, projects, manufacturing and Design Management Commercialisation as well as Business Development.

Mark is a Professor (Grade 2) within the Department of Design and Engineering with research theme responsibility of 鈥楾ribology and Design鈥�. He has been a member of staff at 成人直播 since 1997 and a Professor since 2001. Before this he was a Lecturer 鈥楤鈥� at Brunel University from 1993 within the Mechanical Engineering Department. He has industrial experience as a Senior Project Engineer with AE Wellworthy Ltd (FEA). Mark has also worked at the Royal Aircraft Establishment in Farnborough working on FEA optimisation programs and at Marchant Filer and Dixon Consultant Design Engineers in Romsey.听